Hong Kong Resistors Manufactory (Resistors is our name!)

The working voltage is calculated based on the resistance value following the formula of V=√(P*R) or to its maximum extent as indicated above.
The overload voltage is calculated based on the resistance value following the formula of V=2.5√(P*R) or to i maximum extent as indicated above.

1.1 No markings on 0201 and 0402. Markings on the other sizes are expressed by a 3-digit code in its exact value
    E. G. ： 6R8=6.8；100=10×10 0=10；472=47×102=4700=4.7K
1.2.+/-1% Resistance value markings
    a. Markings on sizes 0805, 1206 and above are expressed by a 4-digit code.
    E. G. ：82R5=82.5；1000=100×10 0=100；2212=221×102=22100=22.1K。
    b. Markings on 0603 ±1%( IEC E–96 Series ) are expressed by a 3-digit code; the first two digits represent the value code and the last capital letter represents the multiplier.
The coding system of the E-96 series is as follows :

Multiplier code：

E. G. ：01Y=100× 10 -2=1；68A=499×100=499；02D=102×103=102K
c. Any resistance values of 1% tolerance but not included in the E-96 series, the value markings are the same as +/-5% tolerance with labelling identification.
d. Marking of the 0 Ohm resistor is a '0' with its value range from 0-50mΩ. No tolerance shown on the product label.

            the first package：1~10 reels               the second package：66 reels Max
· When quantity shall not reach the max, the remaining empty space shall be buried with buffer material.
· When the quantity is a few, altemative packing methods may be used. It is important to ensure the safety of the products during transportation.